« previous next »
Pages: [1] 2   Go Down

Author Topic: Newly revised PCIAFD foam tender.  (Read 8485 times)

Offline Bill Blackhurst

  • Playmo Master
  • *****
  • Posts: 6158
  • Gender: Male
Newly revised PCIAFD foam tender.
« on: September 29, 2009, 14:21:05 »
Hello everyone!
I've been at it again! After my original submission of my Playmobil City International Airport Fire Department foam tender fire truck, I've been revising, & upgrading some of the equipment of this unit, & these are pictures of the new designs. The 2 water monitor/cannons have been upgraded to large volume nozzle foam distribution types. Both water cannons have had 2 large quartz halogen scene spot lights added for night time use. The spot lights move in conjunction with the movement of the water cannons. The 2 water cannons each have independent closed circuit television cameras added, so the pump engineer can see the function of their performance from inside of the cab during the pump, & roll operation. The pump engineer has 2 overhead display monitors to watch the water cannons function. The pump can be activated, & operated from either outside by a manual pump control panel or inside by electronic laptop computer control. This truck is to be operated by a minimum of 2 personnel, or more at all times. A driver, a pump engineer/operator/truck commander, & backup personnel are assigned to this apparatus. I hope you enjoy the pictures, & the story describing the creations.


A picture showing the side view of the 2 newly matched high volume foam distribution nozzles, with the closed circuit cameras, & scene spot lights.


A front top view.


A close up of one of the newly updated water monitor/cannons.


A view of the closed circuit monitor camera.


A view of the water cannons being maneuvered by remote control simultaneously.


Another view of operation.


A view showing the new foam reserve tank mounting.


A picture of the new connection manifold.


Front cab overview picture.


Crew picture showing the onboard laptop pump control computer.


The pump engineer/operator/ truck commander with water cannon remote control.


A picture of the 2 overhead display monitors.





« Last Edit: May 28, 2012, 01:55:25 by Bill Blackhurst »
Logged
  Forget about all of the other stuff,....all we need is the reintroduction of the 3526 Fire Engine!

Offline playmofire

  • Klicky Firemeister
  • Playmo Guru
  • ******
  • Posts: 10946
  • Gender: Male
    • Copt Hewick Volunteer Fire Brigade - probably the world's smallest fire brigade!
Re: Newly revised PCIAFD foam tender.
« Reply #1 on: September 29, 2009, 14:46:24 »
That is VERY impressive, Bill.  Great work and adaptation of existing PM parts.  The CCTV camera is a litle gem of an idea - who would have thought a short length of hose could be turned into a piece of high-tec equipment?   :wow: :wow: :wow:
Logged
“Today well-lived makes every yesterday a day of happiness to remember and every tomorrow a vision of hope.”

Offline Bill Blackhurst

  • Playmo Master
  • *****
  • Posts: 6158
  • Gender: Male
Re: Newly revised PCIAFD foam tender.
« Reply #2 on: September 29, 2009, 14:52:50 »
Quote from: playmofire on September 29, 2009, 14:46:24
That is VERY impressive, Bill.  Great work and adaptation of existing PM parts.  The CCTV camera is a litle gem of an idea - who would have thought a short length of hose could be turned into a piece of high-tec equipment?   :wow: :wow: :wow:

Thank you Gordon, for the positive review  :-[! It's amazing when you can "pretend" what you can devise  :lol:!
Logged
  Forget about all of the other stuff,....all we need is the reintroduction of the 3526 Fire Engine!

Offline Gepetto

  • Playmo Master
  • *****
  • Posts: 1776
  • Gender: Male
Re: Newly revised PCIAFD foam tender.
« Reply #3 on: September 29, 2009, 15:47:55 »
That really is an impressive setup you have there Bill! The equipment looks great as do your photos but the thought and the thoroughness of execution are simply superb! :wow: :wow:

Thank you for sharing your work with us, it is truly inspirational!


Gepetto
Logged

Offline cachalote

  • x
  • Playmo Master
  • *****
  • Posts: 1896
  • Gender: Male
Re: Newly revised PCIAFD foam tender.
« Reply #4 on: September 29, 2009, 17:24:20 »
 :wow:
Logged
    honni soit qui mal y pense

Offline FireChief

  • Playmo Lover
  • ***
  • Posts: 428
  • Gender: Male
    • Playmobil Fire Department
Re: Newly revised PCIAFD foam tender.
« Reply #5 on: October 05, 2009, 21:42:50 »
Awesome, Bill. It amazes me how you can find so many different uses for Playmobil bits. I really like the Computer monitors for controls.  8-) Cool stuff. Great job.


  - Ben
Logged

Offline Andy R

  • DPAAAGG.
  • x
  • Playmo Addict
  • ****
  • Posts: 742
  • Gender: Male
  • I come here for peace and quiet.
    • http://www.survival101.wetpaint.com
Re: Newly revised PCIAFD foam tender.
« Reply #6 on: October 07, 2009, 17:49:53 »
There’s a new type of airport fire engine with a “lance” that allows the firefighters to punch right through the skin of the aircraft and put foam into the cabin. ¿Any way to include that? Just thinking…

« Last Edit: October 07, 2009, 18:12:02 by Bill Blackhurst »
Logged
If I’m jealous, you did SOMETHING right. Keep it up. :D
I Support Operation Anime Storm..

Offline Rasputin

  • The Mad Monk
  • Playmo Master
  • *****
  • Posts: 9695
  • Gender: Male
Re: Newly revised PCIAFD foam tender.
« Reply #7 on: October 07, 2009, 18:07:39 »
Bill you really are getting so great at your customs  :wow:
Logged
If you hear the sound of the bell which will tell you that Grigori has been killed, if it was your relations who have wrought my death, then no one in the family will remain alive. They will be killed by the Russian people. :prays:

Offline Bill Blackhurst

  • Playmo Master
  • *****
  • Posts: 6158
  • Gender: Male
Re: Newly revised PCIAFD foam tender.
« Reply #8 on: October 07, 2009, 18:11:02 »
Quote from: Andy R on October 07, 2009, 18:08:13
There’s a new type of airport fire engine with a “lance” that allows the firefighters to punch right through the skin of the aircraft and put foam into the cabin. ¿Any way to include that? Just thinking…

It's amazing you are asking me about that design ;)! I'm currently doing an exact PM version of the bayonet/lance foam nozzle as we speak! It's to be unveiled in the next couple of weeks! I currently now have 2 foam tenders, 1 that is waiting for some parts from PM, & abroad, the second one is waiting for some refurbished items due to arrive in the near future. The trucks even have an updated version CCTV monitor screen due to an issue that will be discussed during the preview ;D! I'm working on this recommendation, so keep an eye out for the final apparatus! Thank you for your interest!
 
Logged
  Forget about all of the other stuff,....all we need is the reintroduction of the 3526 Fire Engine!

Offline Clong

  • playmo emt
  • Playmo Addict
  • ****
  • Posts: 505
  • Gender: Male
Re: Newly revised PCIAFD foam tender.
« Reply #9 on: August 28, 2011, 04:01:20 »
I know this is an old topic but this is an absolutely amazing custom down to the smallest detail keep up the amazing work bill you surprise with every custom you do.
Logged
Pages: [1] 2   Go Up
« previous next »