Author Topic: Stecksystem XXL - Prototyp  (Read 297 times)

Offline Customizer

  • Playmo Master
  • *****
  • Posts: 1109
  • Gender: Male
    • Klickyworld
Stecksystem XXL - Prototyp
« on: April 12, 2019, 13:54:08 »
Hello Friends,

recently I thought it would not be bad if the XXL figures (60 cm) also had buildings.  :lol:
I have considered the Playmobil plug system to build in XXL.
At the beginning a bit calculated, then consider what kind of material do I take ??
It should be fast to build, from cheap materials and easy to transport and also easy to recycle?!
At Christmas I had worked a lot with Styrofoam for my diorama which worked very well.
The first plates bought in the hardware store and tried .......

SOME WORDS:
It's just a test, a prototype, everything looks even after Dalmatian pattern. (currently no white Styrofoam with us): rolleyes
Also, I have not incorporated any masonry and colored it looks simple.
But everything will come.
I want to look first it works!


It should be as close as possible to the original and 100% compatible as the original !!
So also double storey etc.

A dream of mine is later to build a half-timbered house.
BUT let's start with "SMALL".
With a tower for the Lord Knight.  :lol:

Offline Customizer

  • Playmo Master
  • *****
  • Posts: 1109
  • Gender: Male
    • Klickyworld
Re: Stecksystem XXL - Prototyp
« Reply #1 on: April 12, 2019, 13:56:49 »
So the first step is made the corner connector, he has a height of about 110 cm.
I work with a multiplier of 8.
7.5 cm x 8 = 60 cm !!
So far, everything works as expected!  :rock:
More soon.......

Greetings

Andi

Online tahra

  • Playmo Guru
  • ******
  • Posts: 11769
  • Gender: Female
    • playkingdoms
Re: Stecksystem XXL - Prototyp
« Reply #2 on: April 12, 2019, 14:14:54 »
 8} :o

 :love:

(don't give me any ideas!! And don't let my Knight see that!!)
Tahra

Offline Customizer

  • Playmo Master
  • *****
  • Posts: 1109
  • Gender: Male
    • Klickyworld
Re: Stecksystem XXL - Prototyp
« Reply #3 on: April 12, 2019, 20:16:32 »
Let´s continue ....

Next we come to the "window wall element II"
Something more complex like a corner connector but it went fast.

Playmobil saves on the back a little of plastic, my front and back are identical.
Which makes the part more stable.
The wall structure and ornament comes as soon as all 4 walls are.

ENJOY !!


Offline Customizer

  • Playmo Master
  • *****
  • Posts: 1109
  • Gender: Male
    • Klickyworld
Re: Stecksystem XXL - Prototyp
« Reply #4 on: April 12, 2019, 20:18:32 »
Small information about the window wall element:
Height: approx. 113 cm, width: approx. 64 cm, weight: just 675 g !!

Then a look from the bottom, it should also be pluggable on each other.
So also two floors !!

More soon.......

greetings

Andi

Online tahra

  • Playmo Guru
  • ******
  • Posts: 11769
  • Gender: Female
    • playkingdoms
Re: Stecksystem XXL - Prototyp
« Reply #5 on: April 12, 2019, 20:24:41 »
113 cm?!

:o

I CANNOT.

:love:

Tahra

Offline Macruran

  • desperate but not serious
  • Moderator
  • Playmo Master
  • *****
  • Posts: 2432
  • Gender: Male
  • Hiya!
    • my incomplete collection spreadsheet
Re: Stecksystem XXL - Prototyp
« Reply #6 on: April 13, 2019, 16:01:31 »
Amazing project!  :(o):
"We like things in little." - G. Stein  
 :roman:

Offline Customizer

  • Playmo Master
  • *****
  • Posts: 1109
  • Gender: Male
    • Klickyworld
Re: Stecksystem XXL - Prototyp
« Reply #7 on: April 15, 2019, 07:49:57 »
Hello,

a pic with Wall Connector Corner.

ENJOY !

Greetings

Andi
« Last Edit: April 15, 2019, 07:55:18 by Customizer »

Offline Customizer

  • Playmo Master
  • *****
  • Posts: 1109
  • Gender: Male
    • Klickyworld
Re: Stecksystem XXL - Prototyp
« Reply #8 on: April 15, 2019, 07:57:17 »
and more....

The next element.....the WALL ELEMENT STONE is ready.


Offline Customizer

  • Playmo Master
  • *****
  • Posts: 1109
  • Gender: Male
    • Klickyworld
Re: Stecksystem XXL - Prototyp
« Reply #9 on: April 15, 2019, 08:02:53 »
on the back side, the idea it´s to install a door ?!
Alternative would be the "FRAME WK.ELEMENT".