urgent cry for help : Part numbers needed

[Giorginetto]

I have all my instruction folders in Corinth and not in athens  . I wonder if anyone can help me to tell me the following part  numbers  with pics to ensure they are the correct ones as   i want to buy a few dozen of each from Playmobil asap.... 

The steck double arched gray wall with the two arched openings at the bottom , found in the old steck train station and the Museum

The steck 'wooden' frame opening the double length one used in many steck houses ( yellow, blue, red , white etc) and the single wooden frame of the same type. if anyone can post any pics of these along with the part numbers that will be great help . i will use the arched ones at level 0 and the wooden ones at level 1 of my upcoming double walls ( there will be toothed fortifications at the top, level 2 on both sides) in my next stekc castle. i will need round 80 of each .... 

[playmofire]

You could access the plans via the playmobil site.  The museum is 6307, for example and 3666 will give you the double width house wall, although with these walls it is difficult to tell which number refers to the framework and which to the wall "filling".

The part number for the arch from the museum (I don't have a picture) is 30 07 9600. 

[Tiermann]

The standard open walls like in the 3666 are
30 07 6710 single width
30 07 6780 double width
These are the ones with the male ends
There is also the one with the two female ends as used in the blacksmith set, 30 02 8410

As Gordon said, Playmobil.de Bauanleitungen is your friend, with the instructions for the recent add-ons as well as those form some older sets now available it is a quick lookup away.

[Giorginetto]

thank you guys !!! Slowly but gradually putting more time in playmobil again , been so busy with my car restoration project for over 2 years now but its all completed now so i can focus back again on me playmos now and the world of Krull . I have bought a couple of hundred more mediaval klickies in the past year or so and some steck parts. placing orders now with playmobil and hoping to source a coupole dozen 4 ers so i can get started with my next set up

I promise you all the current one will pale in comparison to my next one !!!!! 

[Giorginetto]

 The double arched walls WILL NOT work in my design !!!! 

Simply because of their length i just cant fit them in properly to make doule sided/ double high walls with frames and floors at both levels without gaps. I found a solution with the single floors and the gamma angle dark steck fillers for in between and on both sides but it wont look good all this so i have given up on the arches .....