PlaymoFriends
General => What is this??? => Topic started by: playmo1989 on July 11, 2010, 21:07:36
-
i would like to buy this set but i don't like the drawing which says" circus" and has a lion face does anyone know if this is a sticker
?
http://static.squidoo.com/resize/squidoo_images/590/draft_lens2279784module12502215photo_1226186620Playmobil_circus_Animal_Trailer.jpg
-
I don't have one of these, but I don't think it is.
Baden
-
I can see no stickers listed on playmoDB and this picture from there suggests that Baden is right, the logo is printed on:
http://playmodb.org/cgi-bin/showpart.pl?partnum=30-63-7492
-
too bad and i wanted it :( :( :( :( :( :( :(
thank you both :)
-
too bad and i wanted it :( :( :( :( :( :( :(
thank you both :)
You could always remove the printed logo.
-
You could always remove the printed logo.
how ? with alcolol i've tryed it and the surface stays very shiny after removing a printing
-
how ? with alcolol i've tryed it and the surface stays very shiny after removing a printing
There are other ways such as very fine wet and dry rubbing paper, car polish, T-cut shine restorer for cars are three I've tried successfully. Cellulose thinners very carefully applied with a cotton wool bud also help remove most of the printing and then the other methods can be used for the last layers. However, whatever you do you risk damaging the surface.
-
There are other ways such as very fine wet and dry rubbing paper, car polish, T-cut shine restorer for cars are three I've tried successfully. Cellulose thinners very carefully applied with a cotton wool bud also help remove most of the printing and then the other methods can be used for the last layers. However, whatever you do you risk damaging the surface.
thanks for the suddjestions , they sound little difficult do do them :-[ :-[ what about sticking tape ? or the skech is very well drawn?
-
thanks for the suddjestions , they sound little difficult do do them :-[ :-[ what about sticking tape ? or the skech is very well drawn?
Here is a topic on removing printing:
http://www.playmofriends.com/forum/index.php?topic=2351.0
-
thanx ;D ;D ;D