PlaymoFriends

Creative => Customs Gallery => Topic started by: cheng on July 25, 2017, 00:55:30

Title: My samurai using a decorated 3D-printed Yari
Post by: cheng on July 25, 2017, 00:55:30
The yari were said to have evolved from Chinese spears but only became popular until the late 15th century.

They had straight blades anywhere from several centimeters to 3 feet or more in length
and shafts often decorated with inlays of metal or semiprecious materials such as brass pins, lacquer, or flakes of pearl.

During the Mongol invasions of Japan in 1274 and 1281,
the Mongols employed footmen wielding long pikes and fought in tight formations moving in large units to stave off cavalry.
Swords were then relegated to emergency sidearm status.

Around the latter half of the 16th century, the Japanese foot soldiers(ashigaru) began holding pikes with length of 4.5 to 6.5 m
combined with soldiers bearing Japanese matchlocks and short spears.

The yari eventually became more popular than the longbow as a weapon for the samurai.
Title: Re: My samurai using a decorated 3D-printed Yari
Post by: tahra on July 25, 2017, 07:55:33
A great playmorepresentation, as always...

6m?! That should be fun to travel with...
Title: Re: My samurai using a decorated 3D-printed Yari
Post by: cheng on July 25, 2017, 08:08:54
6m?! That should be fun to travel with...
...now you got me wondering how they transport them...mount them level on horses? ...might as well give these horses a slap on their backsides and send them galloping towards their enemy  :lol:
Title: Re: My samurai using a decorated 3D-printed Yari
Post by: tahra on July 25, 2017, 09:30:16
...now you got me wondering how they transport them...mount them level on horses? ...might as well give these horses a slap on their backsides and send them galloping towards their enemy  :lol:

How about through a forest?! :0
Title: Re: My samurai using a decorated 3D-printed Yari
Post by: cheng on July 25, 2017, 15:35:10
How about through a forest?! :0

guess they have to carry those long pikes over their shoulders pointing low, backwards and tell those behind not to follow blindly  :lol:
or let this bloke carry them
Title: Re: My samurai using a decorated 3D-printed Yari
Post by: tahra on July 25, 2017, 18:37:57
or let this bloke carry them

:lmao: :lmao: :lmao:
Title: Re: My samurai using a decorated 3D-printed Yari
Post by: playmofire on August 02, 2017, 18:44:20
Excellent custom, cheng, as ever.

Having seem English Civil War re-enactors with pikes, they carry them on their left shoulder, point rearwards and pointing up when marching, e.g. up t the battlefield or through a town to impress the townsfolk..

When travelling any distance in the Civil War itself, wagons were used which could carry pikes or artillery ammunition or other munitions or supplies in bulk.
Title: Re: My samurai using a decorated 3D-printed Yari
Post by: cheng on August 03, 2017, 00:45:14
... wagons were used which could carry pikes or artillery ammunition or other munitions or supplies in bulk.

thanks Gordon!
that would most probably be the same for samurai armies except that in samurai movies, for practical reasons, the producer might not bother to show transport columns unless the story line requires it and also they probably opt for shorter versions of these Yari (which according to Wiki, can be up to 6.5 m /21 ft, and like Tahra was wondering as to how tricky it would have been to transport them through forests) 
Title: Re: My samurai using a decorated 3D-printed Yari
Post by: playmofire on August 03, 2017, 08:46:24
thanks Gordon!
that would most probably be the same for samurai armies except that in samurai movies, for practical reasons, the producer might not bother to show transport columns unless the story line requires it and also they probably opt for shorter versions of these Yari (which according to Wiki, can be up to 6.5 m /21 ft, and like Tahra was wondering as to how tricky it would have been to transport them through forests)

Not only film producers might opt for a shorter version.  There were cases where troops shortened their pikes by 2 or 3 feet to make them easier to carry and handle, which was fine until they found themselves fighting soldiers with the full length pike!
Title: Re: My samurai using a decorated 3D-printed Yari
Post by: cheng on August 03, 2017, 17:22:14
.... There were cases where troops shortened their pikes by 2 or 3 feet to make them easier to carry and handle, which was fine until they found themselves fighting soldiers with the full length pike!

now I'm wondering if this happened in samurai armies too...everyone's human until they lose their head  :lol:

Title: Re: My samurai using a decorated 3D-printed Yari
Post by: playmofire on August 03, 2017, 19:18:39
Maybe excessive shortening of pikes led to the invention of the bow and arrow, especially the arrow|!   :)
Title: Re: My samurai using a decorated 3D-printed Yari
Post by: Pynedor on August 04, 2017, 00:22:39
Great custom, cheng!