PlaymoFriends
General => Direct Service/Parts Queries => Topic started by: GrahamB on February 22, 2013, 20:28:13
-
Please can someone confirm whether this part 30 04 3740 - Jack, screw-type, for corner of truck (http://playmodb.org/cgi-bin/showpart.pl?partnum=30-04-3740) is the same as 30 27 4470 - Stabilizer foot for mobile crane, screw post (http://playmodb.org/cgi-bin/showpart.pl?partnum=30-27-4470), at least in terms of size and shape. They certainly look to be from the same mold.
If you have one of the following sets (which all contain 30 04 3740) and a ruler to hand (or even better a micrometer?), perhaps you could post some measurements which I can compare with 30 27 4470 (which I have)?
3438 - Tow Truck (http://playmodb.org/cgi-bin/showinv.pl?setnum=3438)
3453 - Large Blue/Yellow Tow Truck (http://playmodb.org/cgi-bin/showinv.pl?setnum=3453)
4053 - Work Train (http://playmodb.org/cgi-bin/showinv.pl?setnum=4053)
4053a - Work Train (Revised) (http://playmodb.org/cgi-bin/showinv.pl?setnum=4053a)
5720 - Police Tow Truck (http://playmodb.org/cgi-bin/showinv.pl?setnum=5720)
Thanks
Graham
-
I have just bought a 3438 and will do some measurements for you in the next few minutes.
-
Not very helpfuf answer possibly as the stabiliser legs are difficult to impossible to get out of the guides - the latter in my case. Having said that, it is quite likely they are interchangeable as this would be typical of Playmobil.
Height = 56mm; top is circular with a flattened edge which coincides with a broad slot running down the leg. The leg does not have a true thread, but a series of raised ridges. Not being able to get the leg out, I counted the raised ridges as well as I could and it looks like there are 7. The foot is 24mm by 23mm, and is not square in shape, being indented on two sides.
Hope this helps.
-
More information.
The width of the slot is approximately 5mm. It's difficult measuring the circumference with my wife's tape measure, bit it's about 35mm.
Hope this helps.
-
Excellent and helpful information, Playmofire. All those measurements match the stabiliser 30 27 4470. Thanks for going to so much trouble! I can go ahead and buy a 30 04 3740 on ebay now. If I remember, when I get it I will post a message on here to confirm they are from the same mould (and let Heather at Playmodb know).
Graham
-
Glad to have been able to help, Graham.
-
I received the part a few days ago and can confirm that the two parts are indeed from the same mold (mold number 3178590)
30 04 3740 - Jack, screw-type, for corner of truck (http://playmodb.org/cgi-bin/showpart.pl?partnum=30-04-3740) is the same as 30 27 4470 - Stabilizer foot for mobile crane, screw post (http://playmodb.org/cgi-bin/showpart.pl?partnum=30-27-4470),
30 04 3740 is [light] grey
30 27 4470 is dark grey
Graham
-
Thanks for the input, Gordon and Graham. This kind of information is really only obtainable hands-on, so it's great to have it to share.
30 04 3740 - Stabilizer foot for vehicle, screw post (http://playmodb.org/cgi-bin/showpart.pl?partnum=30-04-3740)
30 27 4470 - Stabilizer foot for vehicle, screw post (http://playmodb.org/cgi-bin/showpart.pl?partnum=30-27-4470)
-
Glad to help, Heather. (A bit off topic, but don't forget to let me know what you want me to do about the 3761 crane.)