PlaymoFriends
Creative => How-To => Topic started by: retronio22 on May 05, 2012, 17:37:00
-
Is it any way to remove the facial characteristics from one of the two faces?For example I want to keep the normal smile,and the other side to be without face!I tried the blue of a rubber,but it's impossible.Only the 5'o clock shadow of the prisoner was removed with the rubber!
-
Why would you want to erase a face that remains hidden under the hair? Anyway, scratch the design with the edge of a sharp blade (scalpel or X-Acto knife), I used this to erase the moustaches from my Mongol warriors, works like a charm!
Best,
A.
-
Thank you!Yes I want to erase these faces,because I want to use normal hair in these figures,which is a bit short,so I don't want the facial characteristics to be seen!
-
If they are printed on faces, you can use very fine wet or dry 2000 grit sandpaper, or automotive scratch removing rubbing compound.
-
why would you want to do that? ??? ??? ???
-
why would you want to do that? ??? ??? ???
I want to use normal hair in these figures,and put strange hair in LYRA sets if it's possible!I have no many fi?ures,just skater and prisoner,but in some days I will buy some!
-
why would you want to do that? ??? ??? ???
because lady gaga is growing unexpected facial hair :hehe:
-
because lady gaga is growing unexpected facial hair :hehe:
Hormones i guess..... ::) ::) ::) ::) ::) ::)
-
dle-90 is the key
-
Had not heard of this product, so googled it.
Joe
Our DLE-90 liquid enables you to remove remains of colour or transfer-pictures from the surfaces of your models.
http://www.lux-modellbau.de/html_uk/sonst.htm (http://www.lux-modellbau.de/html_uk/sonst.htm)
-
Hello!That means that facial characteristics can be removed??????In the prisoner,his eyes and sad mouth can be removed?It looks like are the same with normal eyes and mouth which cannot be removed with a rubber!