Author Topic: Klickys that don’t stand well - is there a fix?  (Read 2110 times)

Offline CrimsonCleaver

  • Playmo Fanatic
  • **
  • Posts: 101
  • Gender: Male
Klickys that don’t stand well - is there a fix?
« on: January 06, 2023, 13:14:12 »
We have a couple of pirate Klickys that don’t stand straight as solid as others. They sort of lean forward (if that makes sense).
This can be a source of frustration for my son as they tip over when holding cutlasses/blunderbusses etc sometimes.

Other than accepting them as quenching their thirst with tavern grog too often - is there a fix for this?
Is it the internal ‘skeleton’ of the Klickys that could be the issue?

Offline tahra

  • Playmo Guru
  • ******
  • Posts: 14866
  • Gender: Female
    • playkingdoms
Re: Klickys that don’t stand well - is there a fix?
« Reply #1 on: January 06, 2023, 13:19:40 »
Other than accepting them as quenching their thirst with tavern grog too often - is there a fix for this?
Is it the internal ‘skeleton’ of the Klickys that could be the issue?

Yes, replacing the frame should sort that...

Offline CrimsonCleaver

  • Playmo Fanatic
  • **
  • Posts: 101
  • Gender: Male
Re: Klickys that don’t stand well - is there a fix?
« Reply #2 on: January 06, 2023, 13:25:47 »
Thanks Tahra, i think that will be the use of the free gifts from Playmobil online purchases.

I just found in this thread:
https://www.playmofriends.com/forum/index.php?topic=530.msg7372#msg7372

‘Slouch’, amazes me how my brain just forgot that term.  Will give that a go first then replace the skeleton if doesn’t help.

Offline CrimsonCleaver

  • Playmo Fanatic
  • **
  • Posts: 101
  • Gender: Male
Re: Klickys that don’t stand well - is there a fix?
« Reply #3 on: January 06, 2023, 14:20:21 »
So I gave the screwdriver down side a go.  I’ll have to find a better screwdriver for this in future.  First one caused quite a few nicks to the trousers, and second though better, shaved the white frame quite a bit. Looks slightly messy now, but thankfully it’s the black legs of one of the characters from 4007 so immediately not noticeable.

The grog slouch is now fixed though!  Just kept bending the back white clip forward whilst leaving the rest of the Klicky as it is.

Will look to get another screwdriver and fix the other one at a later date.

Update: I have no self control (guess hand in hand with starting to collect things) - so used second drive again with tape on end but still nicked the legs.  If anyone has recommendations on polishing/smooth out that kinda thing be appreciated
« Last Edit: January 06, 2023, 14:35:03 by CrimsonCleaver »

Offline tahra

  • Playmo Guru
  • ******
  • Posts: 14866
  • Gender: Female
    • playkingdoms
Re: Klickys that don’t stand well - is there a fix?
« Reply #4 on: January 06, 2023, 19:28:50 »
Since I can't do it with my bare hands (and it's a far from universal method anyways!), my recommended safest method is the popper: https://www.playmofriends.com/forum/index.php?topic=12000.0

I've popped hundreds (a thousand?) of klickys, and I can probably count on my fingers the .. accidents.

So, while not the fastest method, I find it the most universal and the safest.

We could mention whacking, yanking, and... krakked? and ... neoconned? :P


Offline Pynedor

  • Playmo Master
  • *****
  • Posts: 3856
  • Gender: Male
Re: Klickys that don’t stand well - is there a fix?
« Reply #5 on: January 28, 2023, 14:52:54 »
and ... neoconned? :P

Ha! Don't you still owe us a review on that? ;)
~Pynedor~

Offline tahra

  • Playmo Guru
  • ******
  • Posts: 14866
  • Gender: Female
    • playkingdoms
Re: Klickys that don’t stand well - is there a fix?
« Reply #6 on: January 28, 2023, 18:37:13 »
Ha! Don't you still owe us a review on that? ;)

Yes, I think I do..  :-[