General > Trains!

Driveway Layout

<< < (2/6) > >>

playmofire:

--- Quote from: batrugger on February 24, 2023, 02:42:34 ---

just put a tape on it. It is 15x4.5 ft.

--- End quote ---

Ah, so the big difference between the apparent diameter of the nearer end loops and the further ones is perspective and not that you have R2 and R3 curves at one end and R1 and R2 at the other - both ends are inner curve R1 and outer curve R2.  But that means that the width must be something like 5 feet 3 inches.

Junker Jörg:
Wenn ich nach der Anzahl der Schwellen gehe, dann sollte es R1 und R2 sein, dazwischen je neun 30er Geraden. Bei LGB hieße das knappe 1,60m mal 4,30m oder 5,1ft x 14ft. Allerdings sind nicht alle Gleise ordentlich verlegt und zusammengesteckt. Links vorne sieht man, daß der Übergang vom Bogen in die Gerade innen und außen nicht parallel liegt. Das könnte der Grund für die unterschiedlichen Maße sein.

Counting the sleepers it should be R1 and R2 and nine 30cm straights each at the long sides. That's 1.6m x 4.3m or 5.1ft x 14 ft - in theory. But when looking closely you'll see some tracks aren't layed out properly. Inner and outer curve should end parallel (as they do on the right side - but not on the left). So the layout is slightly lopsided which might be the reason for different figures.

jj:

playmofire:
Thanks for that, jj, and your eagle eyes.  The clarification is much appreciated.

batrugger:

--- Quote from: Junker Jörg on February 24, 2023, 13:58:12 ---Wenn ich nach der Anzahl der Schwellen gehe, dann sollte es R1 und R2 sein, dazwischen je neun 30er Geraden. Bei LGB hieße das knappe 1,60m mal 4,30m oder 5,1ft x 14ft. Allerdings sind nicht alle Gleise ordentlich verlegt und zusammengesteckt. Links vorne sieht man, daß der Übergang vom Bogen in die Gerade innen und außen nicht parallel liegt. Das könnte der Grund für die unterschiedlichen Maße sein.

Counting the sleepers it should be R1 and R2 and nine 30cm straights each at the long sides. That's 1.6m x 4.3m or 5.1ft x 14 ft - in theory. But when looking closely you'll see some tracks aren't layed out properly. Inner and outer curve should end parallel (as they do on the right side - but not on the left). So the layout is slightly lopsided which might be the reason for different figures.

jj:

--- End quote ---

Yeah the track has been shifted a little bit and I didn't use connectors, because I'm trying to work out the isolators and power. The day after the video when I took the pic, we had a day of high winds with 80 mph gusts, rain, and snow plus the three big dogs I have that hang out back there. This has been going on for 3 days now so this track is experiencing it all. I took the measurements last night in the dark so I'm sure its moved a bit. Here's a part list for you. All the track is LGB except for the 2 Aristocraft switches on the left and 4 straight pieces in the middle

Junker Jörg:
Brillenadler, Playmofire, bloß noch Brillenadler - altersbedingt :lol:.

Wind und Schnee dürften den Gleisen nichts anhaben. Ich hätte am ehesten die Hunde im Verdacht...  8}.


Spectacled eagle, Playmofire, only spectacled as I'm getting older :lol:.

Wind and snow shouldn't cause trouble to the tracks. I put my bets on the dogs...  8-).

jj:

Navigation

[0] Message Index

[#] Next page

[*] Previous page