PlaymoFriends

Creative => How-To => Topic started by: Mr Raven on January 26, 2017, 11:19:03

Title: Stickers tutorial
Post by: Mr Raven on January 26, 2017, 11:19:03
When putting stickers on our last bought Playmobil set i was wondering what it is like when one has bought Playmobil for the first time and is confronted with stickers. Some sets have several of them and it may look like an impossible task to put them on if youíre not familiar with them. So i got the idea of writing a tutorial about stickers. Members of this forum are perhaps already skilled in putting stickers on, but for others who have bought their first Playmobil set with stickers it may be very useful to read about this subject.

I think Playmobil stickers are great! They can enhance a set and it gives you the choice to use them or not, for example stickers for furniture can be put on or left out. The furniture without stickers can then still be used in custom building.
The quality of the stickers is also great, good print, printing is positioned right and almost never off, and the sticker paper is of good strong quality. 
Is it difficult to put them on? Yes and no, depending on the shape of them, where they are put, and depending on your skills.

Before starting.

This may sound obvious but make sure your hands are clean. Greasy hands can make the paste of the stickers go bad. Also be relaxed. Donít do this in a hurry but do it calmly for the best results. At first you may be a bit nervous about pasting the stickers but once you gain experience you also gain confidence and that helps in becoming more relaxed. And keep in mind that with new sets there is often a spare sticker sheet available at direct parts on the Playmobil website, so if you fail and ruin a sticker you can order a new sticker sheet and try again. Just check first if a spare one is available, it isnít always! With older sets you may be lucky to find spare sheats but often they are not available anymore.

Pasting the stickers.

Playmobil stickers are always numbered, unless there is only one sticker. In the building instructions you can find where to put which sticker according to their number. In a lot of cases the sticker will fit in a ďshapeĒ, like on the background wall of this baby shop on the photo.

(http://i71.photobucket.com/albums/i157/Raven461/LS01_zpsgrx879bj.jpg)
(http://i71.photobucket.com/albums/i157/Raven461/LS02_zpsdn4i3owb.jpg)

In such cases it is not too difficult to put the sticker in the right place. When you are a collector and want it perfect then keep in mind that most stickers are a tiny bit smaller then the shape they fit in, it is rare that a sticker is exactly the same size as the shape. This means you need to ďcentreĒ the sticker for as you start putting the sticker on right at the side of the shape, you will see that at the other end you have some space left. What i often do is holding the sticker above the shape to see how it fits. Beware that most stickers are static and will attach themselves to the plastic! Then i know how much space i leave to centre the sticker. A lot of stickers are long and can have distinctive shapes, like the butterfly sticker on the photo. But it does have some straight lines on either side. I always use straight lines to start with for alighning such stickers. When you start pasting such a sticker do it carefully and keep looking whether it comes on right in the shape. If it goes wrong then simply pull it off gently and start again. These stickers are strong enough to be pulled off gently and the paste stays strong. This strong paste also means that when the sticker is completely on it is hard to peel it off again!
When there is no shape like on the desk here on the photo, then use your own judgement for putting it on at the right place. 

Difficult ones!

First of all, the toothpaste and milkcartons. They often come with stickers, but because of the shape with sharp edges the stickers often peel themselves off a bit. This can be prevented with glue clamps or simple clothepegs. It may take days before the paste holds!
Then there are the long narrow stickers. Here is a photo of the shopping mall set:

(http://i71.photobucket.com/albums/i157/Raven461/SC01_zpsb3e183fd.jpg)

Do you see these sparkly bits on the steps to the entrance? Those are stickers and the hardest i have ever done! Aligning them is very hard. Fortunatly there are markers in the centre of the steps which should be used to put the stickers on properly. Often these markers are little triangles. For me the only way to put these stickers on was starting from these markers, so from the middle of the sticker and not from one end. From the middle go to one end carefully, making sure the sticker is aligned with the step, then do the other end. Raven was holding the baseplate at an angle otherwise it would have been impossible! For such difficult places you may need four hands.
Then the mirrors. Mirror stickers are great as they make a mirror work as a mirror! I donít know what material these stickers are made of, but it could be or looks like thin metal. And they behave like that! These stickers can bend and once there is a fold in them it is difficult to get the fold out again. So be carefull when the pasting doesnít go well and you have to pull the mirror sticker off again. These stickers also have a protecting layer on and i always leave them on untill the sticker is on itís place. This prevents fingerprints on the mirror and believe me it shows.
Round stickers are difficult to align too. Some chairs with a round seat have a sticker on with a design. There is no shape to paste the sticker in and the sticker is smaller then the seat. It is difficult to put the round sticker precisely in the middle of the round seat, if youíre off then it shows and it doesnít look good. I have failed with such a sticker and iím glad Playmobil doesnít have many of those stickers.

I hope that this will be of help to others and maybe an encouragement to someone who is wondering if they can manage to paste the stickers of a certain set. Donít let stickers be in the way of buying a Playmobil set. You can choose not to use the stickers if they donít make much of a difference, or you can ask someone else to do the pasting. Having fun with Playmobil is the most important thing.

I hope i didnít forget anything, but please add your tips and tricks to this tutorial.
Title: Re: Stickers tutorial
Post by: cheng on January 26, 2017, 13:54:03
I can't think of anything to add, except a  thaquestion, no matter how careful I was, I had a few viking shields whose stickers curled up after many years...I do not want to peel it off because only a small part has curled up...but there's little space to spray the raised lip with 3M...glue would damage the rim of the shields...what would you have done?
Title: Re: Stickers tutorial
Post by: Mr Raven on January 26, 2017, 14:31:41
Then what works best is using a glue stick like the pritt stick. Even though it says it's only for paper it will hold the curled part on the plastick. We use it mainly for the toothpaste and milkcartons with good results. Also with a glue stick you can be very precise and only get glue on the curled up sticker and not smear anything on the plastick.
Title: Re: Stickers tutorial
Post by: Macruran on January 26, 2017, 15:04:06
I use fine tweezers to hold and apply most stickers. Especially effective with small ones.

I do dislike stickers though. I am rarely satisfied with their placement, and of course once they're on, that's it, no do-overs. :(
Title: Re: Stickers tutorial
Post by: Tiermann on January 26, 2017, 18:10:39
One other point on the stickers is that they are very good quality. I recently got a used pyramid set and some of the stickers had been really badly applied. Using a sharp point I started one of the corners off and slowly peeled the sticker off. I then was able to put it back on correctly and it stuck just fine. It also didn't lose print from the wrinkling and removal process. Very nice quality on those.

Great tutorial and very useful, thanks Mr Raven!
Title: Re: Stickers tutorial
Post by: GrahamB on January 26, 2017, 22:04:52
A very thorough and complete tutorial, thank you! Applying stickers can be a nightmare, but Keep Calm and Carry On sounds like good advice, Mr.R! And I'm glad you mentioned the mirror stickers, they are pigs if they get bent!

The only thing I might add is that some older stickers cannot be removed because they actually shatter:
(http://i1287.photobucket.com/albums/a621/GrahamB2013/IMG_8396a_zpswepryg8h.jpg)
Title: Re: Stickers tutorial
Post by: tahra on January 26, 2017, 22:10:56
Thank you for the tutorial...

Mine always come out crooked. :-[

And then there are the motorcycle helmets stickers, which are a breed apart.
Title: Re: Stickers tutorial
Post by: leefert on January 26, 2017, 22:20:44
Absolutely the best way to apply stickers. Sometimes I get off just a little and leave it alone. I get annoyed when there are air bubbles that I can't push out- and so with those I take a sharp sewing needle and poke a small hole to let the air escapes (and no noticeable damage to the sticker.
Title: Re: Stickers tutorial
Post by: cheng on January 27, 2017, 02:06:46
and with pointers here and there from seasoned playmofriends...adds up to decades of experience here  ;)
(but I've said it before, so many toys are now 360į printed while others have good quality vinyl stickers....when Geobra changes to those, I'll be very sad with my paper-stickered playmo, no matter how perfectly stuck and still glossy they may be  :-\ )
Title: Re: Stickers tutorial
Post by: Mr Raven on January 27, 2017, 05:35:39
Thank you all for the additions! I forgot to mention tweezers, that's a very good point.

@ Tahra: These motorcycle helmet stickers have the same problem as the milkcarton stickers? Because of the rounded shape of the helmet they let loose? How do you deal with them?
Title: Re: Stickers tutorial
Post by: tahra on January 27, 2017, 08:35:15
@ Tahra: These motorcycle helmet stickers have the same problem as the milkcarton stickers? Because of the rounded shape of the helmet they let loose? How do you deal with them?

They are a piece of... junk. That is the issue. They are NOT like the milkcarton. They are junk to begin with.

I have glued a couple. Other than that, I don't know. A lot just "break" in the middle.

Seriously, I have NO idea what is the problem with them, compared to all the others, but they are consistently junk.

Uhm.. I am not sure I have any RECENT helmet with stickers. Still, the point stands, since all the other old sets that have stickers don't really have these issues, and the helmet stickers also had them when they were brand new.
Title: Re: Stickers tutorial
Post by: Tacbe on April 28, 2017, 07:34:35
With small stickers I use the following method:
1. Peel of only a small part of the stickers corner from the sticker sheet
2. Put a small utility knife blade (such as Stanley) under the sticky side of the stickers corner
3. Peel the entire sticker of the sticker sheet while holding the the sticker in the corner between the utility knife blade and your finger. (Your fingers don't touch the sticky side)
4. Apply the sticker on the object.
  - End with the corner stick to the utility blade knife only if its placed correctly.
  - If not placed correctly, peel it of again.
  - The sooner you detect if its placed incorrectly the better
  - If sticker is applied and its placed incorrectly and you already removed utility blade from its corner, gently peel of the sticker starting in the end corner

But most important (as already mentioned by Raven) Don't do this in a hurry . . .

I feel sorry for all those parents which bought a huge box of Playmobil for the 1st time, giving it to their child for their birthday, not knowing its takes time to assembly and apply the stickers. Poor kid who wants to play with it instantly.

And last but not least. The kid who wants to do everything by itself . . . . .  . .  :-[ and you don't want to discourage him . . .

Good tutorial Raven, Thanks
Title: Re: Stickers tutorial
Post by: GrahamB on May 10, 2017, 18:06:19

I feel sorry for all those parents which bought a huge box of Playmobil for the 1st time, giving it to their child for their birthday, not knowing its takes time to assembly and apply the stickers. Poor kid who wants to play with it instantly.


and many Christmas Eves/ Christmas Mornings are taken up with assembling PM and other toys...
Title: Re: Stickers tutorial
Post by: Tarra Nova on July 07, 2021, 00:35:30
I know I'm late here re 'stickers', but I'm kinda new and still reading older posts!
As I have little to no hope of getting replacements here in Canada, I've started scanning my new sticker sheets.  If I mess up (!) applying one, or they start coming off, I'll be able to reprint onto adhesive paper, trim and reapply.
Gotta say, Playmo stickers are little works of art!
Title: Re: Stickers tutorial
Post by: playmofire on July 07, 2021, 07:23:24
I know I'm late here re 'stickers', but I'm kinda new and still reading older posts!
As I have little to no hope of getting replacements here in Canada, I've started scanning my new sticker sheets.  If I mess up (!) applying one, or they start coming off, I'll be able to reprint onto adhesive paper, trim and reapply.
Gotta say, Playmo stickers are little works of art!

Good move there, and you might be able to help others who have messed up fixing the stickers.