Author Topic: 70548 USS Enterprise NCC-1701  (Read 1493 times)

Offline Alex

  • Playmo Pal
  • Posts: 13
70548 USS Enterprise NCC-1701
« on: June 05, 2022, 23:00:14 »
Hi folks,

I recently was able to purchase the USS Enterprise, thanks to a combination of a discount and a lucky series of gift cards for a Canadian online retailer.

This is a VERY impressive ship!  I will do this post in multiple parts so I can post more photos, and try not to repeat the publicity materials but focus on what I learned actually building it.

It is very well designed (as you would expect from Playmobil). My only complaint is that two small screws are needed to attach the saucer section to the body of the ship, which are very hard to access (you need to use pliers to turn the screwdriver).

You also have to run internal wiring to connect all of the lights.

Many stickers to apply, with great care required. Some of the stickers are lenticular to create the illusion of depth in engineering and on the viewscreen or to have the bridge doors appear to open and close.

Overall time to build (including stickers) is about 3 hours.

More to come…

Offline Alex

  • Playmo Pal
  • Posts: 13
Re: 70548 USS Enterprise NCC-1701
« Reply #1 on: June 05, 2022, 23:11:27 »
Here are some more photos showing the wiring and the lenticular stickers.

Offline Alex

  • Playmo Pal
  • Posts: 13
Re: 70548 USS Enterprise NCC-1701
« Reply #2 on: June 05, 2022, 23:14:50 »
Here we have the “klicky krew” assembled on the bridge (with Mr. Scott in engineering).

Offline Alex

  • Playmo Pal
  • Posts: 13
Re: 70548 USS Enterprise NCC-1701
« Reply #3 on: June 05, 2022, 23:22:20 »
The light and sound is quite good. The lights on the nacelles don’t just flash, but rotate in multiple colours (red, yellow and green) with multiple LEDs.

Three buttons on the command console (which also lights up) can control the light and sound, and a black button in engineering (with still more lighting) turns it off.

Alternatively, you can control individual light and sound with the app.

Offline Alex

  • Playmo Pal
  • Posts: 13
Re: 70548 USS Enterprise NCC-1701
« Reply #4 on: June 05, 2022, 23:28:31 »
There is enough room on the bridge to put the cover on without disturbing figures that are standing up.

This view gives a real sense of the size (with yours truly for scale):

Offline Alex

  • Playmo Pal
  • Posts: 13
Re: 70548 USS Enterprise NCC-1701
« Reply #5 on: June 05, 2022, 23:34:14 »
All in all, this is an absolutely fantastic set, and definitely one of the most impressive pieces that Playmobil has made.  If you will pardon a pun, I would call it the “flagship” of the Playmobil line!

Offline Klickteryx

  • Playmo Master
  • *****
  • Posts: 1591
Re: 70548 USS Enterprise NCC-1701
« Reply #6 on: June 06, 2022, 00:03:19 »
Yes playmobil has undertaken a great enterprise here.

Offline Tiermann

  • Playmo Master
  • *****
  • Posts: 8952
  • Gender: Male
  • Playmosaurus friendus
    • Animobil
Re: 70548 USS Enterprise NCC-1701
« Reply #7 on: June 06, 2022, 02:32:21 »
Thanks for the review.  They seem to have done ok with sizing it just big enough without being completely unmanageable.  To actually be properly sized to the figures it would be massive.

Offline Ismene

  • Playmo Master
  • *****
  • Posts: 2348
  • Gender: Female
Re: 70548 USS Enterprise NCC-1701
« Reply #8 on: June 06, 2022, 05:42:01 »
Oh wow, you might be the first person on PF to actually buy it! Thanks for sharing. It's interesting to see the assembly photos (since the official photos are of the fully-assembled ship).

Would a right-angle/offset screwdriver help with those awkwardly-placed screws?

Offline Alex

  • Playmo Pal
  • Posts: 13
Re: 70548 USS Enterprise NCC-1701
« Reply #9 on: June 06, 2022, 08:50:12 »
Yes, a right angle screwdriver would work (although I do not have one, hence my difficulty). The screws are small Phillips head screws, and require a fair amount of force to tighten.