PlaymoFriends

Creative => Photography & Graphics => Topic started by: AgeOwns on December 21, 2021, 15:51:28

Title: 007 James Bond Astin Martin ejector seat works great!
Post by: AgeOwns on December 21, 2021, 15:51:28
(https://live.staticflickr.com/65535/51736706333_a137b8c1ea_c.jpg) (https://flic.kr/p/2mPN9ja)007_17 (https://flic.kr/p/2mPN9ja) by Andy Jones (https://www.flickr.com/photos/mrstinkhead/), on Flickr

I recently got the James Bond Astin Martin and it's pretty fun to play with. My son and I had fun getting this photo. That's legit how high the bad guy will launch. I did photoshop out my hand and use an alternate angle of the chair as you can see in this unaltered photo

(https://live.staticflickr.com/65535/51737360400_cd1cd8df20_c.jpg) (https://flic.kr/p/2mPRuKb)007_16_BTS (https://flic.kr/p/2mPRuKb) by Andy Jones (https://www.flickr.com/photos/mrstinkhead/), on Flickr

Also, this works really well with my micro-fogger!
(https://live.staticflickr.com/65535/51736706198_061a7679aa_c.jpg) (https://flic.kr/p/2mPN9gQ)007_15 (https://flic.kr/p/2mPN9gQ) by Andy Jones (https://www.flickr.com/photos/mrstinkhead/), on Flickr


I also tried my hand at painting one of my figures in gold, but the spray paint was a bad idea. I'll try again with a gold pen
(https://live.staticflickr.com/65535/51759901708_c3f86854a8_c.jpg) (https://flic.kr/p/2mRR2uq)007_20 (https://flic.kr/p/2mRR2uq) by Andy Jones (https://www.flickr.com/photos/mrstinkhead/), on Flickr

Title: Re: 007 James Bond Astin Martin ejector seat works great!
Post by: Oliver on December 21, 2021, 16:18:34
That's a great picture!
Title: Re: 007 James Bond Astin Martin ejector seat works great!
Post by: tahra on December 21, 2021, 18:52:19
AMAZING!

And that second one is a real unchanged pic?  :o 
(mind boggles)

As to the lever think, I found it needs a lot of strenght, imo... Anyways, mine is unlikely to really do that again... like most blinky-winkies (this is one such... because.. :P )
Title: Re: 007 James Bond Astin Martin ejector seat works great!
Post by: Tiermann on December 21, 2021, 19:45:29
Great images! It's a great looking set. I held off because I assumed the Mercedes gull wing would be in silver too, but it's going to be white racing instead. May get this one eventually after all.
Title: Re: 007 James Bond Astin Martin ejector seat works great!
Post by: Pynedor on December 21, 2021, 20:10:01
Nice pictures! Your editing looks really good. <*)
Title: Re: 007 James Bond Astin Martin ejector seat works great!
Post by: Macruran on December 23, 2021, 05:07:51
 :lol: :lol: :lol: Great work!  :deco:
Title: Re: 007 James Bond Astin Martin ejector seat works great!
Post by: Birdie on December 31, 2021, 09:08:38
Such a fun project to do with your son. It looks amazing!
Title: Re: 007 James Bond Astin Martin ejector seat works great!
Post by: JLMatterer on January 03, 2022, 20:34:54
Mine doesn't work great.  :'( Where the ejector lever should be on mine, there is just an empty hole.  8} I bought 2 sets & gave one away as a Xmas present; I was clueless until my brother-in-law showed me what his car looks like.

I showed Deluxe Toy the problem & then called PM USA. PM said they would replace the car after they hear from Deluxe. I'm keeping my fingers crossed. The lever is not a separate piece and has no part number, & even if I could get a replacement lever, I'm not sure I could assemble it properly as it needed to be done in factory. PM agreed with me.

Wish me luck!  :lol:
Title: Re: 007 James Bond Astin Martin ejector seat works great!
Post by: tahra on January 03, 2022, 21:01:40
I showed Deluxe Toy the problem & then called PM USA. PM said they would replace the car after they hear from Deluxe.

That's really bad, JLMatterer - but hopefully they replace it - hope you get to keep the extra car!

Good luck!
Title: Re: 007 James Bond Astin Martin ejector seat works great!
Post by: Klickteryx on January 03, 2022, 21:56:36
Amazing photo!

If you haven't painted already, brass spray paint is pretty good for giving a gold result.