PlaymoFriends

General => Collector's Corner => Topic started by: pingo on September 03, 2023, 13:17:05

Title: Measurement of Bell
Post by: pingo on September 03, 2023, 13:17:05

 :wave: Is there anyone who can measure the Bell, part Number 30 80 1440 belongs to 3445 Castle Tower or the red and blue circus
I just bought the new edition of the tower set 70953 and have found a used Bell support frame  :clap:
So now I just need a bell  ;)

Title: Re: Measurement of Bell
Post by: StJohn on September 03, 2023, 14:26:57

I don't have a spare bell but congratulate you on your acquisition.

Quote from: pingo on September 03, 2023, 13:17:05

(...) used Bell support frame  :clap:
So now I just need a bell  ;)

It is actually two parts: a large one spanning the tower, and a smaller triangular one (in brown with 3445, in red or blue with the circuses) holding the copper bell. Did  you get both?

As to hunting for a bell: going after an incomplete circus is probably the easiest option.

Title: Re: Measurement of Bell
Post by: GrahamB on September 05, 2023, 17:49:04

I have four of those bells (Prison Tower, Red, Orange and Blue Circuses). I measured them all. They are 40mm in diameter and 29mm tall. Do you need more measurements or pictures?

Title: Re: Measurement of Bell
Post by: pingo on September 09, 2023, 19:27:07

Quote from: GrahamB on September 05, 2023, 17:49:04

I have four of those bells (Prison Tower, Red, Orange and Blue Circuses). I measured them all. They are 40mm in diameter and 29mm tall. Do you need more measurements or pictures?

 :thanks: for the dimensions
Now the hunt is on for a bell  :lens: