PlaymoFriends
Creative => Customs Gallery => Topic started by: Customizer on November 19, 2019, 12:41:42
-
Hello Friends,
today I start with the wall plug system.
After buying a 3d printer and trying a little, i wanted to make playmobil parts.
I've always liked the parts of playmoebius.
www.playmoebius.com
So I tried how it looks with 3d printing.
I do not want to duplicate other customizers so I try to make new ones.
First made a 120 degree connector to install the 6 corner tower into the wall system.
120 degree connector
(http://www.klickyworld.com/customizing/3D-print/castle/a17.jpg)
(http://www.klickyworld.com/customizing/3D-print/castle/a20.jpg)
So we need new BATTLEMENT COLUMN with 120 degree !!
120 degree battlement column
(http://www.klickyworld.com/customizing/3D-print/castle/a9.jpg)
(http://www.klickyworld.com/customizing/3D-print/castle/a10.jpg)
(http://www.klickyworld.com/customizing/3D-print/castle/a7.jpg)
(http://www.klickyworld.com/customizing/3D-print/castle/a36.jpg)
(http://www.klickyworld.com/customizing/3D-print/castle/a37.jpg)
We need a perfect 120 degree connector to make a oriel ?! Idea from playfan11.
Perfect 120 degree connector
(http://www.klickyworld.com/customizing/3D-print/castle/a34.jpg)
more soon....
klicky greets
Andi :wave:
-
MORE !!!!! :yippee:
Hello Friends,
the next idea was a 45 degree connector.....
(http://www.klickyworld.com/customizing/3D-print/castle/a39.jpg)
(http://www.klickyworld.com/customizing/3D-print/castle/a19.jpg)
(http://www.klickyworld.com/customizing/3D-print/castle/a24.jpg)
(http://www.klickyworld.com/customizing/3D-print/castle/a25.jpg)
(http://www.klickyworld.com/customizing/3D-print/castle/a23.jpg)
(http://www.klickyworld.com/customizing/3D-print/castle/a22.jpg)
more soon.....
klicky greets
Andi :wave:
-
Those are SOOOO AWESOME!! :love:
There is so much that could be added to the steck system..
-
Excellent ideas! If only Playmobil had produced them.
-
Very nicely engineered!
-
Wonderful parts Andi! Floors? A floor for a half round tower would be cool too.
-
Just... wow, what a magnificent comeback! I'm speechless. :o
The steck system is ripe with potential, and your pieces allow for some previously unseen architectural wonders!
-
Hiho,
thanks for your Feedback !! :wave:
@Tim: floors come later, thanks for the idea , will make it soon. ;)
NEW WALL ELEMENTS ! :lol:
One Piece, but i think we dont need two or three single Elements ?!
Was only the base for the window !
(http://www.klickyworld.com/customizing/3D-print/castle/a2.jpg)
(http://www.klickyworld.com/customizing/3D-print/castle/a3.jpg)
MODIFIED wall without connector:
(http://www.klickyworld.com/customizing/3D-print/castle/a1.jpg)
WALL with Window !! :rock:
(http://www.klickyworld.com/customizing/3D-print/castle/a4.jpg)
(http://www.klickyworld.com/customizing/3D-print/castle/a5.jpg)
(http://www.klickyworld.com/customizing/3D-print/castle/a11.jpg)
more soon...
Greetings
Andi :wave:
-
They just get better and better.
-
:omg:
-
One Piece, but i think we dont need two or three single Elements ?!
Personally, I don't find these a must - I rarely have need of MORE straight walls (will I?), and while it would be easier to build (as in faster)... I have some playmoebius parts, not properly tested yet, in truth :-[ , but they feel more brittle and fragile than the original, so I would prefer to go with 2 or 3 original ones...
Of course, the one without the connector doesn't fall in that department, and counts as a new part, and as such.... welcome! :)
WALL with Window !! :rock:
Wow. :love: :love:
You should open a steckstore. (my wallet is making threatening noises, but that is usual... pay no attention...)
-
These are amazing! Really well done, and will make your buildings so much more varied.
-
The walls with windows look ready to become a mainstay of many a medieval building!
-
The walls with windows would be ideal for a monastery cloister.